CAPTAIN HOOK Basic Hook Selection for Finesse Bass Fishing

Fishing Hooks

When I first started fishing about six years ago, I would walk into a tackle shop and be overwhelmed by the incredible variety of hooks that were on display. At the time   I was fishing mostly with plastic worms and had little knowledge of the basic hooks and how they were used with different lures and presentations.

Basically I started out picking up a bag of hooks in the “These look like they should work OK mode". I didn’t really understand what the hooks were for besides getting stuck inside the mouth of a bass if I was lucky. I spent a lot of time experimenting with different styles, read a lot, and spent a lot of time in the trial and error phase.
If I knew then what I know now, I would have saved a lot of cash on all those hooks that I don’t use much anymore.

 2_tackleboxthmbGeorge CawthornAnyway, the idea came to me that someone new to bass fishing might like to get a little peek inside my tackle box and see the three basic styles of hooks, and the three sizes that I now use almost exclusively. I have boiled it down to nine hooks.

Three primarily for dropshots, three primarily for Carolina and T-rigging, and three primarily for grubs, tubes and bulkier plastics. The important word here is PRIMARILY.

As you will see, depending on what type of lures you are using, an almost endless number of combinations of hook and lure presentations can be achieved with these nine basic hooks that I now use.

Bass Fishing Hook Selection

   
FIRST - DropShot Style Hooks SECOND - Wide Gap Hooks
Fishing HooksThere are three Owner Mosquito Dropshot hooks sizes 8, 6, and 4. Note that in the smaller size dropshot hooks they get smaller as the numbers get bigger.

4_mosquitosthmb
Fish HooksNext we have three Extra Wide Gap (EWG) offset shank hooks sizes 1/0, 3/0 and 4/0 For this group the hooks get bigger as the numbers get bigger; which I use for larger bulkier plastic worms, grubs and tubes.
Fish Hooks
     
  THIRD - J-Bend Worm Hooks  
  Finally we have three offset shank "J-Bend" worm hooks, sizes #2, 1/0, and 3/0. Great hooks for Texas Rig andCarolina Rig.
Bass Fishing HooksOffset Fishing Hook
 

Dropshot Rig Hooks

dropshot-col
The weedless version.
(Style A)
The exposed hook/jig version.
(Style B)

I use the dropshot hooks with different sizes depending on the lure. For the most part I use smaller worms, 4.5” and 3” so the number 8 is my favorite. I do know many fishermen who prefer the size 6 or 4, but I have found for the smaller dropshots you get better actions with less weight on the nose of the hook using the number 8. Plus, if you are into Catch and Release like I am, the smaller hooks make it a little more challenging and do a heck of a lot less damage to the fish when the hooks are removed.
dropshot 
You may be thinking “Dang! A number eight. What is that guy doing…trout fishing?” Trust me, the number 8 works great when you’re fishing with small lures, and I have landed many nice bass using them. The following photos are all showed rigged up with the number 8 on a 4” BPS Quivering Tail Dropshot Minnow. The first method shown in full length (above) is the nose hook method.

16_ewgrigbbontailthmbOn larger lures, such as this seven inch ribbon tail worm (to the left), I like to use the 1/0 EWG hook with a heavy 1/2 oz. egg sinker for a dropshot weight. This allows for long distance casting into deep water from the shoreline.
10_lizarddropthmb
Also for the dropshot I sometimes use the #2 offset shank worm hook for lures like this six inch lizard(to the left).

Carolina Rig and Fly-Lining Hooks

12_carolinathmb


For these two I use the offset shank j-bend hooks in sizes #2, 1/0, and 3/0 depending on the size of the lure and how fast I want it to sink.

These hooks are also great for trick worms and craws.

Texas Rigged - Weighted and Weightless

17_ikathmb



For the T-RIG WEIGHTLESS grubs I use the larger EWG hooks like the number 3 and 4 for fat bulky lures like the Fat Boy Ika. The larger size hooks add some extra weight to these for longer casting and faster drops.

9_trigthmb


To the left you will see a typical Texas Rigged worm on a J-Bend Hook.

The weight on the nose of the worm shown here is a Bullet 3/16 ounce screw in type.
11_senkothmb



For the T-RIGGED WEIGHTLESS TEX POSED using the 5” Senko I like to use the 1/0 offset shank (J-Bend) worm hook and thread it all the way down to the middle of the worm for a nice horizontal fall.

So that's it for the Magic Nine...

 OK... I confess there is one other hook I use alot, but I use that for swimbaits which I don’t consider to be Finesse lures. The Falcon 3/0 3/32 oz. EWG bait jerk hook; it works really good with the
Fat 4.8” Keitech Swing Impact lure (shown below) and also larger tubes.
Keitech-col

Captain Hook's Conclusion...

1_openerthmbHook sizes and numerical designations vary from one manufacturer to the next. Also, hooks come in different colors, like "bleeding red" for example. If you have to make a choice of one color I suggest going with black chrome (also called Black Nickel), if it is available. I’ve had the most success with those.

If you are on a limited budget (and who isn’t these days?) you could easily get by with the Owner #6 for dropshot, the 1/0 offset shank j-bend worm, the 3/0 EWG worm hook for starters (the middle sizes).

Or better yet you could join up with two friends and co-op for the nine bags of hooks and split them up. Although, this approach might take a little bit more socialization skill than most fishermen that I know have.


Take it from CAPTAIN HOOK, give some of these ideas a shot and you’ll be getting hooked up with some really nice bass in no time. And don’t forget to experiment with different lures, setups, weights, lines etc. After all you can dropshot just about any plastic lure.